| 〈 |
Punch
former is the fixture to grind the
point of standard punches and E.D.M.
electrodes for precise and fast
operation. |
| 〈 |
Besides the round,
radius and multi-angle punches, any
special forms can be ground
precisely. |
| 〈 |
By using this
attachment, it can be ground either
concave or convex radius shape. |
| 〈 |
The capacity is
from 4mm to 30mm.
Punch Former is the great dressing
instrument.
|
| 〈 |
assembling an ARM
with the main body. Any combination
of tangents or radial form of the
grinding wheel may be dressed
accurately by easy operation. Max.
diameter of grinding wheel within
200m/m can be dressed accurately and
safely. The height from base to
roller's center is 80m/m. Movement
of each side can reach 12.5m/m while
aiming at the center of V block. The
main body may be of one piece steel
construction. |
|
Specification |
D(diameter) of the pressed part of
the punch...4.30mm
L(length) of the pressed part of the
punch...above22mm
Upper and lower movement span of V
block.....25mm
Horizontal movement span of V
block(one side)...12.5mm(two
side)...25mm |
Length
of V block....30mm
Height of the rotary central
axis...15mm
Cutting and dividing...24 equal
pieces(15")
Weight...10kg.
Sand forming of the forming lever
(concave R)...100mmR
(convex R)...48mmR
Diamond sharpening knife
(small diameter)60*50(1/10carat)
(large diameter)100*50(1/4carat)
*Except for the handle and
graduation scale all material is
special hard tool steel (SKS-2) heat
treated at HRC63
*V block can be disassembled for use
separately. |
高基INQUIRIES