1. Workhead	2. Left-hand tailstock 3.Right-hand tailsock	4.Diamond   dresserholder	5. Wheel guard 6. Wheel guard 7. Wheel guard 8. Wheel guard

9. Wheel guard holder(long) 10. Wheel guard holder (short) 11. Universal tooth rest plate and Blade holder extension 12. Center gauage 13. Collet wrench 14. Plain tooth rest holder(with offset blade) 15. Ejector rod 16. T-wrench for grinding wheel sleeve 17. Sleeve extracting bar 18. Pin wrench 19. Micrometer adjustable toothrest (with round top blade) 20. Levelling pads(3 pcs) 21. Touch-up paint 22. Plain tooth rest holder(withoffset blade)

	23. Reducing collet B & S No.12xNo.10 (or MT No.5 x No.4) 24. Reducing collet B & S No.12xNo.9 (or MT No.5 x No.3) 25. Reducing collet B & S No.12xNo.7 (or MT No.5 x No.2)

26.Grinding wheel sleves(5sets)

			27.Grinding wheel(6〞x3/4〞x1 1/4〞) 28.Grinding wheel(6〞x3/4〞x1 1/4〞) 29.Grinding wheel(6〞x1/2〞x1 1/4〞)

30.Grinding wheel(3〞x1/2〞x1 1/2〞x1 1/4〞) 31.Grinding wheel(4〞x1/16〞x1/2〞) 32 Grinding wheel(5〞x1 1/2〞x1 1/4〞) 33.Grinding wheel(3〞x1/2〞x 1/2〞) 34.Double end wrench 35.Nut wrench 36.Driver 37.Nut wrench 38.Allen type wrench 39.Washer for 1/8〞 dia.grinding wheel

40.Center for workhead spindle B & S No.7 (or MT No.2)

41.4〞spindle extension 42.4〞extension wheel sleeve and collar 43.Belt for spindle drive(Poly-flex belt)

44.Draw-in bolt for workhead and washer

45.Tool cabinet 46.Extension and washers of slit-saw And side-mill cutters.

SPECIFICATIONS

　

Capacity: Inch Metric 　 Swing over table 10〞 250mm Distance between centers 27 1/2〞 700mm Distance between tailstock & workhead 22 3/4〞 580mm Taper hole in workhead spindle one end ASA No.50 Other end M.T.No.5 or B & S No.12(Specify by order) 　 Table: 　 T-Slot(numer & size) one 0.565〞 +0.05mm 15.00mm 0.563" -0.00mm Working surface 5 5/16〞x37〞135x940mm Grinding wheel spindlw rpm 2600,3700,6200 Grinding wheel spindle motor 1HP 0.75kw Range of movement: 　 Longitudinal movement of table 16〞400mm Cross movement of saddle 10〞250mm Graduation for table swivel movement +-60° Table graduation on end,for taper of +-10° Vertical movement of wheel head 10〞250mm Wheel head tilts +-15° Wheel head swivels 360° From wheel spindle center to top of table max.12〞300mm Min.2〞 50mm From wheel spindle center to T-slot center max.16 1/2〞415mm Min.6 1/2〞165mm Required floor space 61〞x68 1/2〞1550x1735mm Net weight of machine 25601bs. 1160kgs Dimension of Packing case K1460x1460x1510mm

　

MAIN DIMENSIONS

>>EXTRA ATTACHMENTS