いゅ

Electronic Lathe   EL-460   EL-510/610
* Electronic centre lathe is designed to conform to the safety standards of EN292.
* Fully integrated design.
* Full power at low spindle speed. Excellent for large chucking and long shaft work applications.
* Large spindle bores 82 mm or 105 mm diameter with ASA D1-8 or D1-11 spindle noses for 510 & 610 series.
* The 400 mm wide bed with " Peters Ribbing " gives excellent torsional stiffness and good swarf clearance under working areas, with induction hardened and precision ground guide ways for 510 & 610 Series.
* Centralized automatic slide way lubrication system.
* Removable swarf bin.
* Manual mode electronic hand wheels for X and Z axis joystick feed and rapid motion control.

FEATURE EL-5115E EL-5120E EL-5130E EL-6115E EL-6120E EL-6130E
Swing Over Bed 510 mm ( 20" ) 610 mm ( 24" )
Swing Over Cross Slide 300 mm ( 11.81" ) 400 mm ( 15.75" )
Centre Height 250 mm ( 9.85" ) 300 mm ( 11.81" )
Distance Between Centers 1500 mm ( 60" ) 2000 mm ( 78" ) 3000 mm ( 118" ) 1500 mm ( 60" ) 2000 mm ( 78" ) 3000 mm ( 118" )
Width Of Bed 400 mm ( 15.75" )
Spindle Drive Rating 11 Kw / 15kw (15HP / 20HP )
Spindle Speeds ( LOW Ranges ) 33 ~ 265rpm
Spindle Speeds ( High Ranges ) 250 ~ 2000 rpm ( ASA D1-8 ) 250 ~ 1600rpm ( ASA D1-11)
Spindle Nose ASA D1-8 (std) ASA D1-11 (option)
Spindle Bore 82 mm ( std ) 105 mm ( option )
Spindle Front Bearing Bore 120 mm ( std ) 140 mm ( option )
Longitudinal Working Stroke 1470mm (60") 1970mm (77") 2970mm (117") 1470mm (60") 1970mm (77") 2970mm (117")
Cross Slide Stroke 290mm (11.42")
Feed Force - Longitudinal 6785 N ( 1524 lbf )
Feed Force - Transverse 3390 ( 762 lbf )
Rapid Traverse 10 m/min max.
Range Of Feeds In Manual Mode 0.01 to 500 mm/rev ( 0.0004 to 1968 in/rev )
Topside Width 150 mm ( 5.9" )
Tailstock Quill Diameter 90 mm ( 3.54" )
Tailstock Quill Stroke 150 mm ( 5.9" )
Morse Taper In Quill MT 5
* Actual working stroke maybe reduced by workholding equipment and chuck guards.
* Add mm to machine length if HYD chuck option is fitted.
* Specifications are subject to change without prior notice.

MACHINE TYPE MACHINE OVERALL DIMENSION MACHINE NET WEIGHT
EL-5115E AND EL 6115E (L x W x H) 3600 x 2030 x 1820 (142" x 80" x 72") 5560 kgs ( 12232 Ibs )
EL-5120E AND EL 6120E (L x W x H) 4100 x 2030 x 1820 (162" x 80" x 72") 6050 kgs ( 13310 Ibs )
EL-5130E AND EL 6130E (L x W x H) 5100 x 2030 x 1820 (200" x 80" x 72") 4500 kgs ( 9920 Ibs ) (3 pieces of base )

STANDARD EQUIPMENT
1. Interlocked safety guard.
2. AC servo motors and precision ground ballscrews to both axes.
3. Automatic slideway lubrication.
4. Ergonomically mounted operator controls.
5. Coolant system.
6. Wheeled chip bin.
7. High intensity machine light.
8. Spindle centre bush.
9. Tool kit.
10. Tailstock center.
11 Electrical handwheel for two axes.

OPTIONAL EQUIPMENT
1. 3 jaw chucks.
2. 4 jaw chucks.
3. Rear toolpost.
4. Tailstock live centre.
5. Chip conveyor.
6. Chip bucket.
7. Manual 4-way tool post.
8. HYD. Chucking.
9. 8 position turret. ( 510 & 610 & 380 series ).
10. Sandvik quick change tool post ( 460 & 380 series )
11 Inner tool holder ( 380 series )
12. Center sleeve 6, 10, 12, 16, 20, 25.
13. Enlarged spindle motor 7.5 / 11 kw ( 380 & 460 series )
14. HYD. tailstock.
15. Transformer.
16. CE Mark.

* Auto 8 position turret
( 380 Series )		 * Auto 4 way turret
( 510 & 610 Series ) 		* Manual 4-way tool post
* Auto 8 position turret
( 510 & 610 Series )		 * Auto 4 way turret
( 460 Series ) 		* Sandvik quick change tool post

     高基INQUIRIES